China Future Sound

MGB 8 | 8″ 600 WATTS MAX POWER MIDRANGE SPEAKER

DESCRIPTION

The MGB8 is part of the exclusive ULTIMATE competition line, is a development that combines excellent linearity with high efficiency and high power handling capabilities. The MGB8 is designed primarily for use as a low-medium controller in extremely compact enclosures.
 
Its ultra-thin paper cone with fiber threads, which allows the reproduction of low frequency waves and the accuracy of high frequencies. The coil also uses Interleaved Sandwich Voice coil (ISV) technology. The latest generation 3 ”CCAW coil. It has a high-strength fiberglass former transports windings on the outer and inner surfaces to achieve a mass-balanced coil, we also use a copper ring technology, in the internal polar component and thus not lose the reproduction of the high frequencies or linearity in high power handling. Which leads to an extremely efficient engine assembly.
 
The cooling of the mobile coil is achieved by using paths, between the back plate of the chassis and the front plate of the magnet that allow the heated air of the mobile coil to dissipate. The technology of the MG8G1 is one of the latest generation and positions as one of the best brands compared to similar ranges or equipment.
  • 8-inch Aluminum Basket High power midrange speaker 
  • Peak Power: 600 Watts
  • RMS Power: 300 Watts
  • High quality non-pressed paper cone 
  • Single roll cloth surround 
  • Aluminum Basket 
  • Ferrite Magnet 
  • Short ring inside 
  • 3″ High Temperature CCAW I/O Voice Coil 
  • Frequency Response: 95 – 4.5Khz
  • Sensitivity: 93.2 dB
  • Fs: 95 Hz
  • Re: 8 Ω
  • Qms: 3.97
  • Qes: 0.5
  • Qts: 0.44
  • Mms:22.6 gr
  • Cms: 0.124 mm/N
  • Bl: 11.56 n/a
  • Vas: 8.05 L
  • Sd: 213.8 cm²
  • Xmax: 2 mm
Tab Content
Tab Content
Share on facebook
Facebook
Share on twitter
Twitter
Share on linkedin
LinkedIn
en_USEnglish