China Future Sound

MN12 | 12″ Midbass Speaker


Available with 8″, 10 ” and 12”

The PM8F is an very high output wide bandwith frequency transducer. The 8inch diameter piston will produce extremely high sound pressure levels at both low and mid band frequency and is ideal for high level response in both live sound and recorded music venues. the operating range is 70hz to 4500hz.the transducer uses high enery ferrite magnetic to achieve a very high acoustic output to weight ratio.

The PM8F employs a large 3inch diameter voice coil that provides an AES rated 400 watts of continuous power handing and a full 800 watts of peak rated powe handing when sufficient amplifier headroom is available .the PM8F utilizes CFS auto balanced cooling technology to not only improver transducer power handing and reliability but to also increase power compression performance by carefully balancing and directing airflow to critical areas.
The voice coil design is an “inside/outside” PI ccaw wire technology to improve conversion efficiency .
The system suspension han been designed specifically for high liner displacement and extended low frequency response. The single spider configuration that provides system reliability and mechanical control.
The transducer chassis is a die cast aluminum design that insures a very high degree of structural integrity.
  • 12-inch Dual 8 Ohm Voice Coil Configuration
  • Peak Power: 2000Watts
  • RMS Power: 1000 Watts
  • Competition Grade  Non-Pressed Paper Cone
  • Stitched High Roll Foam Surround
  • Advanced Air Flow Cooling System
  • 4″ High Temperature Copper Voice Coil
  • Frequency Response: 52- 3.5 KHz
  • Sensitivity: 96.7dB
  • Fs: 52 Hz
  • Re: 8 Ω
  • Qms: 5.03
  • Qes: 0.31
  • Qts: 0.29
  • Mms: 60.7gr
  • Cms: 0.148mm/N
  • Bl: 18.31n/a
  • Vas: 64.25 L
  • Sd: 551.1 cm²
  • Xmax: 4.25 mm
Tab Content
Share on facebook
Share on twitter
Share on linkedin

Powered by WhatsApp Chat

× Need Help?